Optimize coverage materials
Choosing cover materials with good transparency and strong insulation properties, such as double-layer PO film or thin films with added infrared blocking agents, can effectively reduce heat loss.
For northern regions, it is recommended to use double-layer film coverage, forming an air insulation layer in the middle to enhance the insulation effect.
Strengthen wall insulation
Increasing the thickness of the wall, it is recommended that the wall thickness of the earth wall greenhouse be above 60 centimeters, which can improve the heat storage capacity.
Install insulation layers on the outside or inside of the wall, such as polystyrene board, rock wool, etc., to block heat conduction.
Regularly inspect the walls, repair cracks and holes, and prevent cold air infiltration.
Install insulation curtain
Install insulation curtains on the top and side walls of the greenhouse, such as high-density Oxford cloth with spray bonded cotton insulation curtains, which can be unfolded or rolled up as needed. Covering at night can significantly reduce heat loss.
Choose an electric film roller to control the curtain, which is convenient to operate and ensures sealing.
Improve ground insulation
Cover with plastic film to reduce soil moisture evaporation and maintain soil temperature. The northern region can adopt the "double film coverage" or "two ridges and three films" full film coverage technology to improve the geothermal effect.
Covering the rows with crop straw, bran, and other heating materials can store heat during the day and release heat at night, while reducing air humidity.
Handle the cold bridge area
Insulation treatment should be carried out on cold bridge parts such as gutters, foundations, and metal columns, such as using hollow structural materials or applying insulation layers to reduce heat conduction.
Lay 5cm thick foam polystyrene board or 3cm thick polyurethane foam board outside the foundation and parapet wall to prevent ground temperature loss.
Strengthen the sealing of ventilation openings and doors and windows
Install sealing strips to ensure a tight fit when doors, windows, and ventilation openings are closed, preventing cold air from entering.
Reasonably control the ventilation time and volume to avoid excessive ventilation during low temperature periods.
Increase heat storage capacity
Place heat storage materials such as water tanks, stones, or bricks inside the greenhouse to absorb heat during the day and slowly release it at night, alleviating sudden temperature drops.
Install automatic temperature control system
Equipped with automatic temperature control equipment, real-time monitoring of the temperature inside the greenhouse, automatic activation of heating or ventilation equipment, and improvement of insulation efficiency.
How To Improve The Insulation Performance Of Multi-channel Greenhouses?
Oct 21, 2025
Leave a message






